Sound and Light System Installation Process

Nowadays, the demand for sound and light equipment for events is increasing. This leads to many people being curious about the sound and light installation process. Let's learn about this process with HSV Media through the following article!

SOUND SYSTEM INSTALLATION PROCESS

1. Survey the installation location

Before installing the sound system , HSV Media staff will come to the event location to survey: sound installation area, measure stage length to fully prepare equipment.

Then we will discuss and advise on the appropriate sound package as well as the sound operation and installation process so that customers can grasp the details of the construction process.

2. Install sound system

HSV Media will prepare and transport the equipment to the event location. Next, we begin the installation process.

Step 1: Arrange speaker position

Speakers are one of the most important devices in audio systems. Therefore, when arranging speakers, we arrange them carefully and keep a safe distance.

Step 2: Connect the wire from the speaker to the amplifier

After installing the speakers, the next step is to take the signal from the speakers on the amplifier and connect them to the Input terminal behind the subwoofer. Then we will proceed to align the sub's layering, adjust the volume appropriately to ensure that the device does not howl when the microphone is close.

Step 3: Connect the mixer to the amplifier and microphone

Next, turn off all the power signals of the amplifier and plug the amplifier into the mixer's input source, check the mixer's output and connect the wire to see if the signal is received to connect the microphone to the mixer.

Step 4: Align the amplifier

Finally, we will adjust the microphone sound and check the sound quality according to customer requirements.

3. Test the sound before the event

Before the event takes place, we will check all equipment, test the sound and fix errors (if any).

LIGHTING SYSTEM INSTALLATION PROCESS

1. Determine the location to install the light

Determine the stage location, design the appropriate installation location for each type of light. Then prepare enough lights, wires, lamp stands, etc.

2. Prepare the lamp hanging frame

Lights such as scanner lights, moving head lights, etc. need a fixed hanging frame to maximize their function. Therefore, when installing these types of lights, HSV Media always prepares sturdy hanging frames to ensure safety throughout the event.

3. Install the appropriate type of light for the location that needs lighting.

Each type of light will have different functions, so depending on the purpose of the event, there will be different lighting systems. HSV Media will install and arrange the lighting system suitable for the event.

4. Check after installation

Once the installation is complete, we will conduct a thorough test to ensure that the lights are working properly and will repair any faults (if any) during the event.

WHY SHOULD YOU RENT SOUND AND LIGHTING AT HSV MEDIA?

You probably know the importance of sound and light at events. Therefore, choosing a reputable rental unit will help you feel secure. During the event, no technical errors are allowed to occur. That is an essential requirement for the event to be successful.

HSV Media is the unit that helps you have a successful event. Why do we affirm that? Follow the reasons why you should choose HSV Media:

- HSV Media is a long-standing sound and lighting rental company. We operate under the motto "Prestige - Quality - Professionalism - Low Price" and have received the trust of many customers and businesses over the past 10 years.

- HSV Media always provides and serves genuine sound and lighting equipment , with clear origin and product code . Good facilities, professional and experienced technical staff .

And finally, our team of enthusiastic consultants are always ready to support and answer all your questions 24/7. Call us now via hotline: 0362.209.208 for more details.